Search Results for: the winter coat construction

Pick Three

If you had to choose three (and only three!) things you’ve ever sewn to best represent what you can do, what would you choose?

I’ve recently been tasked with exactly this, and I found it incredibly difficult to decide. I mean, it’d be difficult enough if I was confined to just one type of garment, like “Pick three dresses” or “Pick three casual garments”, etc, but just three, from the hundreds of garments I’ve sewn in the past nine years?! This required thought.

Pick One…

Having said that, strangely, the first of my picks was pretty easy – my Winter Coat.

I made this coat two winters ago and I’m really, really proud of the finish on it. The wool is extremely thick, with bound buttonholes, metal buttons, single welt pockets, a thick silk lining, and (most proudly for me) I didn’t use a single bit of fusible anything in its construction. I wear it to death in winter and I love everything about it.

Pick Two…

Should I play my trump card and pick my vintage refashioned wedding gown? Well, alright then!

A beginner's knit maternity dress

Just to make things absolutely clear – no, I am not pregnant!

But my very good friend (and beginning sewer!) Holly is, so I’m doing some maternity sewing for her over the next few months, and helping her to sew a few things for herself, too. We’ve already had an afternoon session converting regular trousers to maternity versions (and I’m thrilled to report that she’s since gone home and done a few of these herself, too!), but it’s down to me to start the “from scratch” garments.

The first project was to make a “wearable muslin” of this Burda knit dress from June 2010. She picked this pattern out of a lineup, and it’s actually great for a beginner. The seamlines and construction are pretty straightforward, and you get a lot of bang for your buck with this, as there are two sleeve variations and two length variations!

I traced off all the different versions, and used the double tracing wheel I picked up in Budapest to even add the seam allowances on for her, too (something I never bother to do for myself, as I prefer my patterns without).

For this muslin I used some viscose jersey donated by Claire (Seemane) specifically for muslining purposes. The print is definitely too wild for me, but it might come in handy for Holly while she’s got a limited wardrobe. I don’t think it’s an ugly print by any means, and I could see her toning it down with a black or navy jacket or cardigan.

Draped jacket – in progress

Last weekend I cut out all the pieces for my upcoming draped suit, Burda September 2011 #126 and 127, in the beautiful grey stretch wool suiting I’d bought specifically for it.

Since then, though, progress has been slow. I’ve got an evening class for work every Monday night, I’ve found a wonderful, brilliant amazing running club I go to on Tuesdays, and our weekends are still chock full of boat DIY work as we scramble to get the last outside work done AND the insulation up before the weather turns. Which leaves exactly three evenings left for all of our social activities, and any sewing left to squeeze in. This week I’ve got something on all three of those evenings, too.

So this really leaves progress to be made in very small segments. I’m very good at finding spare ten minute pieces of time here and there, but lately even these have been thin on the ground. Over the past week, I only managed to work on this jacket twice – on Wednesday night I fused all the necessary pieces with Pam’s weft-insertion interfacing and vilene bias tape, and then Sunday afternoon I actually managed to get a few hours of sewing done once I’d done 3 hours of insulation work and the dust settled enough in the hold for me to get out my ironing board.

Beyond that, while we were working on the construction part of the boat, something happened to the 24v cabling and so the lights in the bedroom, sewing room, and one other area no longer work. So my sewing room is very dark now, even when it’s light outside! Please accept my double apologies for the quality of these photos – I had to light the area with a headtorch while taking these on my (soon to be upgraded, yayyy!) old iPhone 3G camera.

My aqua pleated skirt

I’ve been talking about making this skirt for months now – I really liked it when it first appeared in the September 2010 issue of La Mia Boutique (#26), and then I thought I’d make it this winter, but my chosen fabric seemed too summery… But finally, its day has come and I’ve made it a reality!

It’s hard to see in the magazine photo, but there are pockets integrated into two of those pleats, too, which I really like!

And then someone on Pattern Review was asking for a pattern suggestion to knockoff this Karen Millen skirt, and I realised that my LMB pattern was really very fashionable indeed!

My pattern has more pleats, plus the added pockets, so I think it’s a better design, but I still appreciate seeing similar clothes in high end RTW, especially if I already liked the design anyway!

A velvety MyImage bolero jacket

Ever since I saw the first previews online of the MyImage Summer 2011 issue, I knew that this cropped, pieced jacket (M1107) was going on my Must Sew list! I just didn’t know quite how quickly fate would throw us together!

Even though MyImage are a new pattern company, other sewers have reported that the sizing was pretty consistent, so I just threw caution to the wind here, made a size 42, and cut into my fabric!

And yes, it goes really well with the jeans I’d just made, too!

Asymmetric Plum Lace Top

The latest installment in my post-coat winter sewing plans is the asymmetric pleated turtleneck, Patrones 296 #14.

In this design, you’re given the pattern pieces for a turtleneck top, where the front has been cut diagonally across the front. So if you’ve not got this issue of Patrones, just go and draw a curvy line across your favourite turtleneck pattern!

In the magazine photo, the sleeves and upper front piece are pleated and underlined, but I chose to overlay lace on mine instead. Patrones provide the pattern pieces for the post-pleated fabric (allowing you the fun of working out exactly how much fabric you’d need for whatever size pleats you choose!), so it was super simple to just use those finished pieces to cut out the lace overlays instead.

The plum fabric here is a gorgeous bamboo/lycra jersey that I bought from Ditto in Brighton last month, and it’s so unbelievably soft, and with a nice, beefy weight and good stretch. I loved Wazoodle’s bamboo years ago, but this stuff is even better as it’s thicker and doesn’t wrinkle anywhere near as readily. I am utterly in love with this fabric! I’ve got another of their bamboo/lycras in red and I’m itching to make something from that now, too. The green stretch lace I bought at Tissues Dreyfus in Paris last summer, and I love how the two together give a bit of an antique look….

Lekala ribbed top

Many of you correctly guessed that my first project from my post-coat winter sewing plans would be the Lekala knit top, as there’s nothing better than a “quick knit top” after a long and involved project!

Even better – this is my first ever Lekala pattern! This top is very similar to Burda magazine 05/09 #103A, but I’ve been wanting to try Lekala for months now, so I went with this instead.

Lekala patterns are usually €0.50 each (€1 if you want seam allowances included), but 8004 is one of Lekala’s free patterns made to your measurements. You enter in your height, bust, underbust, waist, and hips (all in cm), and then you’re emailed a pdf pattern! I chose the pdf pattern for A4 paper with no seam allowances.

Un-petiting the Burda September cover dress

While I wait for the weekend to photoshoot the Lekala ribbed top (either you all are too smart or I’m too predictable!), I’ve started work on creating the cover dress from the September Burda magazine. It’s a really cool, curved seam design with no side seams and designed for knits, but it’s one of Burda’s Petite patterns.

I am in NO way petite – at 5’8” (172cm), I am closer to Burda’s Tall height (180cm) than I am to the petite height( (160cm). I have a sneaking suspicion that my torso is quite compact and my height is mostly in my legs, but in any case… I’ve made a few of Burda’s petite patterns before with good results, namely, my 30th birthday dress and the blue silk cocktail dress, so I wasn’t totally scared off because it’s for petites.

I made up a muslin of the top half of the dress (the half I’m most concerned with) on Wednesday night and I’m happy with my alterations so I thought I should share what I did.

First of all, lay out pieces 1 and 2 so that their folded edges are aligned, taping the pieces together loosely. Then lay out pieces 8 and 9 so that their folded edges are aligned, and that these meet the front pieces at intersections 7 and 8. Don’t worry that the shoulders are far apart or that some of the curved seams don’t meet up whilst flat.

My alterations are the white pieces shown below:

Patrones 294, 296, 297, & 298

These issues of Patrones are a few months old, but I only just received them so I thought it was worth a brief whirlwind tour of my favourites (even if it’s only to jog my memory later when I’m looking for patterns to sew)!


(Top: 297, 296. Bottom: 298, 294)

First up is a surprise summer issue – James’s parents visited Portugal in December and I asked if they would keep an eye open for Manequim or Patrones while they were there, and despite looking everywhere, they only found this copy at the airport on their way home! Considering it’s 5-6 months old, I have no idea how it was still around!

Patrones 294

This issue is nearly entirely wispy summer dresses that can’t really cope with our bold and brash English “summers”, but I do think this Hilfiger-esque shift dress would work well in our climate. With a cardie.

Navy blue riding trousers

Jacquie made these trousers as part of her recent wardrobe collection (she’s “dingyadi” on PR) and I instantly knew I had to make them, too. Like her, I was put off by how skin-tight these looked on the Burda model in the magazine, but in real life, they fit really nicely! Unlike her, I left off the front patch pockets, though, as I figured there was enough going on everywhere else!

They’re from Burda magazine 08/2008 #120A:

They’re great trousers, but there’s just so many freaking pieces, omg! And the topstitching!!

Take the front leg, for instance. On a normal pair of trousers, it’s one piece (maybe three if you have a pocket). On these, the front leg is comprised of three pieces before you even get into the pockets (so 6 in total for mine, or 9 if you chose View B with the added pouch pockets with the flap!). There’s a scooped pattern piece at the inner thigh in the front and back, and lots of horizontal topstitching across the knees in addition to topstitching pretty much every seam of the trousers, too.