Search Results for: jl mini

Golden silk asymmetric blouse

From a total loser of a silk blouse to a triumph of a silk blouse, all in one afternoon! After the Burda FAIL, I turned around, cut into my gorgeous butter yellow floral silk charmeuse I bought at Ditto in Brighton last weekend, and sewed up this blouse in about two hours flat!

The layout of this blouse is really cool, and the entire blouse is just one piece, with only one side seam (and two shoulder seams). I took a photo of my fabric when it was laid out on the floor, and I added some annotations in pink (below) to help show where the drapey side comes into play. I hadn’t realised it from the diagram, but the CF neckline is on the straight grain, and the CB neckline is on the cross-grain, with the only side seam on the bias. Very cool, and the design feels quite Bunka.

I used the leftover silk in the bottom left corner to make several bias strips about 4cm wide, as I prefer a narrow bias edge on my silk blouses instead of finicky facings. I also left off the shoulder bow, as I felt there’s enough going on in this blouse already!

We were very lucky to catch the “golden hour” on Monday evening, which just makes this silk come alive in these photos! I’ve paired it here with my grey leather skirt to try and give an edgier look to the twee floral of the silk.

Embroidery and bunting

I seem to be pretty lucky so far to have escaped the constant chemo nausea I was told to expect. I’m on two different chemo drugs now until Sunday when I switch to a third on its own, and so far one of them has had zero affect on the way I feel, and the other seems to be giving me wildly different comedy afflictions each day (first fever & headache, then the next day a weird bumpy rash like mosquito bites all over my body plus breathing problems, then tonight it just seems to be a 2 hour long sneezing fest. weird.). In any case, it’s so far much easier than I was expecting (knock on wood), so it’s given me some time to do some crafting in amoungst my tv and film watching.

Yesterday (Day -7) (in bone marrow transplant land, the day you get your stem cells is Day Zero, so right now I’m counting down to that, 8 July. After I receive them, I’ll go into the positive numbers!)

Yesterday I did a bit of ham-fisted embroidery, finishing up a bit for a baby present, which I’ll reveal when it’s totally finished, as well as finally finishing that Sublime Stitching apron kit I’ve been working on here and there over the last few months (remember this from the al fresco sewing day?).

KnipMode boyfriend jeans

It seems like everyone’s caught the jeans sewing bug recently! Maybe it’s the warmer weather or just the slow realisation that I could really do with more casual trews in my wardrobe, but KnipMode Jan 09 #11a really took my fancy and wouldn’t let go.

This is my first pair of Knip trousers (the leggings don’t really count!), though certainly not my first pair of trousers or jeans!

Annoyingly, it’s hard to get a good look at these jeans in the magazine photos – they’re either covered up by her jacket, or partially shown in the detail shots, or just not photographed at all.

But between these and the technical drawing, I was able to piece together how these should go together, in what order, and with what topstitching (I posted some essential topstitching tips a few years ago, fyi). What really drew me to the pattern was also to be the most difficult sewing aspect – the front pattern piece has “arms” at the top that wrap around completely to meet at the centre back, and the back piece of the trousers has a curved seam around the bum, and wraps round slightly so the “side seam” on the legs is actually on the front:

So this means there’s no traditional side seam to tweak the fit, and there’s no centre back seam in the waistband to tweak there, either. So if you’re unsure of the fit, I’d fully recommend sewing a muslin first, though I actually just threw all caution to the wind here and used my super heavyweight Levis denim from the outset (since I’ve made so much KnipMode in the past and knew I was a consistent size).

The Sewing Weekender Number 3

No sooner were we back home from Iceland than I was on my way up to Cambridge for my third Sewing Weekender! The first year I was lucky enough to buy a ticket, then last year I gave my “Sewing for Movement” talk as a speaker, but this year I was determined to attend again and set my alarm in order to buy my ticket as soon as they went on sale.

No joke, these tickets were hotter than Glastonbury – we crashed The Fold Line’s site and tickets sold out in like ten minutes despite having doubled capacity this year to 100 places!

The reversible disco jacket

I don’t often sew for James (preferring to fill my own wardrobe instead!), but every now and then he either sees something online that he’ll take inspiration from, or have a fully formed idea in mind that he’d like me to bring into reality. So this one is another fantasy jacket, this time modeled heavily on Betabrand’s reversible smoking jacket.

When we were in Paris in March, he bought a wonderful wonderful wool/poly blend corduroy at the Tissues Dreyfuss Coupons shop for €10 total (a complete bargain!) as well as some red chinese brocade to use for the other side.

I started sewing this when we were in drydock in April/May, then I stalled at the bound buttonhole stage since my little red machine isn’t great for precision jobs (no speed control!). Then the pressure was off during summer, but the cooler weather meant I really did want to finish it for him!

Even better – James surprised me buy buying Betabrand’s “open source” disco fabric, so now the jacket changed slightly in that the reverse will be PURE DISCONIUM!

What I’ve made here is the ultimate day-to-night jacket!


(Thank you to Kerry for the photo on the right!)

I started with his last fantasy jacket as the pattern base (which, in turn, started life as Burda 10/2008 #134) since it fit him really well, then James had a bunch of style changes to make to this one: