Tag: satin

Blog

Gallery

A floral bias top

Happy Friday everyone! I like to buy souvenir fabric whenever I’m travelling, and when I was in Malaga last summer competing in the World Transplant Games I bought one meter of a lovely floral poly satin at a fabric shop we stumbled across in the centre of town.

I’m not usually a floral woman but this digital print really spoke to me for some reason, and now that the weather has warmed up it felt right to cut into it – and what better way to showcase the beautiful photo print than with a little bias top pattern I’d already tested? So I pulled out Burda 6501, which I’d made last summer in a viscose print and worn loads since.

Gallery

A colourblocked Cynthia Rowley satin jacket

Last week I mentioned a few projects I’d been working on, including a little satin jacket to wear with both my purple Matthew Willamson birthday dress and my swirl sheath dress. Well, the Welsh wedding was over the weekend and we managed to squeeze in some photos in the hotel room before the big bash so you all can see how it coordinates with the Matthew Williamson sheath!

As I mentioned before, the pattern is the same Cynthia Rowley Simplicity pattern I used for my fuschia party dress – a simple, loose, open jacket with dropped shoulders and wide sleeves.

I didn’t have enough of either satin to make the entire jacket in one colour so I decided to colourblock it. Since there weren’t many seams in the jacket itself, I just drew some extra seamlines onto the pattern pieces for my colourblocking.

In Progress

Roundup of updates

I appear to have found myself again in the position where I’ve been doing an extreme amount of sewing and sewing-related activity, but I can talk about only a small portion of it, and I don’t have any proper photoshoots for the things I can talk about… Bad, Melissa, very bad!

So consider this a little roundup post to let you know what I’ve been up to, until I can get my act together properly…

Silver cowl top

I cut out this MyImage cowl top pattern before we went to Mexico, thinking I might have enough time to quickly sew it up before we left. I would’ve, too, if I hadn’t decided I needed to make a quick travel bag. So it was waiting for me when I got back to cold, grey London, mocking me with its sleeveless-ness. I finally just sewed it up so I could have the space back in my sewing room, though I’m afraid I won’t really get to wear this until next year.

I made it out of some absolutely glitter-tastic jersey I bought at Tissue Reine in Paris a few years back, and I recall it was on the pricey side. It also left a trail of silver all over my sewing room… Boo.

Gallery

The Swirl Sheath Dress

This dress has been an awfully long time in the making. The idea started back when I took the Pattern Magic 2 class at Morley College last winter, where we learned a technique called “Fundamentals: Create three-dimensional forms with design lines only” (it just rolls off the tongue, eh?).

Essentially what this means is you sew up a muslin, draw design lines all over it, cut along these lines, then introduce snips of ease until the pieces lie flat, and there’s your new pattern! I did all this (based on a sheath dress from the June 2012 Burda magazine, which doesn’t appear to be on the US BurdaStyle, sorry) last summer, but then the project stalled when I couldn’t find any heavyweight stretch satin anywhere in Europe, and had to import this gorgeous salmon stretch duchesse from Gorgeous Fabrics.

Then there were further delays as I didn’t have a wide enough cutting table to lay out the asymmetric and strangely-shaped pieces, until a few weeks ago when the Thrifty Stitcher invited me to pow-wow at her studio and suddenly my swirl sheath dress was back on track!

Because all the darts from the original pattern (bar one) are now incorporated into a bunch of curved seams, this means there’s a lot of easing going on, so if you don’t like easing princess seams, for example, you really won’t like sewing this. My easing motto is “pin the crap out of it”, and I’m proud to say that I didn’t have any tucks or unpicking in any of these seams. Though I did use 58 pins on just the lower semi-circular seam!

In Progress

A Big Weekend for Sewing

I had an uncharacteristic free weekend – no races and not much planned, so I ended up getting lots of sewing bits done!

Sewing room clear-out

I’ve only got a small (temporary) sewing cave, and I’m a very tidy, organised person, but I’d let it get a little messy and it was feeling crowded, so after my two hour hill run on Saturday morning, I came back and had a bit of a clear out. I filled a full black bag with rubbish, but here’s what I pulled aside to swap at the Goldhawk Road meetup on Saturday!

Yes, you could be a good home to some pattern, pattern magazines, books, craft kits, or fabric that once lived on board! Now, if I can manage to be good and not fill up the space with things I pick up in the swap or fabric stores…

Skylight cover

Remember the last time I made a skylight cover (strangely, I see last time I was sewing jeans alongside it, too!)? I’d only ever made them for the back cabin, where the skylights are peaked, with windows that open like wings, but on the front deck, the skylights are flat and require grills that fit overtop for safety and security.

We had a joiner make a gorgeous new cover for the skylight over our bedroom, but it’s been shamefully covered in tarpaulins for the last few months while I procrastinated swearing my way through sewing another.

Even with a walking foot, the clear plastic is a total P-I-T-A to sew because it sticks to the machine bed, the foot, is stiff and rams into everything, and is generally just awful.

This time around, I got so sick of the stickiness that I grabbed a “newspaper” (tabloid left from our joiner) and ripped off pieces to go underneath and also under the presser foot.

This surprisingly worked rather well, and the newspaper just rips out easily afterwards. Worth remembering if a) you don’t mind newsprint on your fabrics, and b) like me, you never have tissue paper lying around

It’s not my best work, but it’s done and will allow more light into our new bedroom!

Jeans muslin

If you recall, I decided on a Burda pattern for my non-stretch denim so I sewed up a quick muslin of that on Saturday after my skylight triumph.

The triumph was short-lived.

Gallery

Dark green sateen Clover trousers

As I mentioned earlier this week, I bought the new Colette Patterns Clover trouser pattern and I just had to try it right away!

There’s only four pattern pieces (five if you count the pockets) so this is about as simple as trousers get, and Colette have rated this as for Beginners, too. My first step was to make up a quick muslin in some super cheap stretch viscose I had on hand, but I hadn’t realised that the stretch was lengthwise until midway throgh cutting it, meaning there’d be no stretch around the body.

And you know what? These trousers still fit like a dream, with zero fitting wrinkles! I kid you not! It’s like Sarai came and measured me in my sleep or something (really, that’s bordering on creepy right there!). The only alteration I made with this final version was to add 2” to the leg length at the indicated line. Otherwise View A (the longer length) were still above my ankle bone when unhemmed. I’m not sure what height Colette drafts for, but I usually have to lengthen Burda trousers, too (but not Knip!) so I’d guess it’s around the 5’6” range.

I’m happy to say that this version in a nicer (but not terribly much more expensive) fabric fit just as well around the waist and hips, and are now the perfect length, too!

Even Bosco couldn’t resist coming along to rub up against them!

In Progress

Draped jacket – no ordinary lining

There’s been only slow and steady progress on my draped suit (Burda September 2011 #126 and 127) this week as there’s been little time to sew, but I did get a few hours of “me time” in on Sunday evening after my insulation work was done for the day.

Those few hours were enough for me to finish the entire shell of the jacket and skirt, but I needed a clear surface to cut out the lining fabric, so that was delayed until last evening (since my running group was cancelled). Since the wool suiting has stretch, I didn’t want to negate the benefits of that with a non-stretch lining, so I pulled out one of the few stretch wovens in my stash – a blisteringly hot pink stretch satin I’d bought from Fabric.com last year (and came across in my mom’s suitcase before the wedding). Despite it being polyester, it actually feels wonderful and it was worth the price to be such a high quality lining.

Gallery

Manequim silk birthday blouse

I love this blouse!

It all started in Paris last June when I saw this amazingly gorgeous silk satin (charmeuse) in Tissues Dreyfus that I just had to have. But it was €22/m (zoot alors!) so I only bought 1 metre. But even now I still love it love it love it love it so it was worth it worth it worth it!

Ever since, I kept my eyes open for a good blouse pattern that only needed 1 metre of fabric, and along came Manequim Feb 2011 #158, which called for exactly the amount I had – 1 metre long and 150cm wide!

These two were clearly meant to be together! I don’t often do prints, but this one is just so gorgeous with the psuedo-floral/paint splatters of silver, black, orange, and fuschia that I wanted it to form both the centrepiece of my March Mini Wardrobe as well as be my special birthday garment this year!

In Progress

Patrones spring coat – finished shell

Are you thoroughly sick of the sight of the Patrones spring coat yet? Well, too bad, because it’s taking me forever!

The good news is, I sailed smoothly over the speed bump that caused me so many headaches and delays in making my winter coat – the bound buttonholes. I’d already decided that with such a thick, loosely woven fabric that’s so prone to unravelling, that I’d use the satin bias tape I’d bought for binding the hood seam allowances to also make the bound buttonholes.

So I pressed the satin bias tape flat, cut it down to 1/2 inch wide strips, then folded these in half (right sides out) to make the buttonhole “lips”. After basting my ladder stitches on all the coat tabs, I did the usual technique of sewing these lips to the right side and cutting open the buttonholes.

But here’s where I deviated a bit – since my wool unravels so much, I knew that trying to stitch those tiny triangles at the ends would just be an exercise in futility, so I pulled out some lightweight knit interfacing and cut out a tiny strip. I then pulled the triangles to the back and fused the interfacing over top to keep them out of the way:


(It’s a bit hard to see but the mesh white interfacing over the left and right ends is there!)

Gallery

Satin cowl blouse

You’ve seen it in the tweed and satin three piece suit, now it’s time to reveal the blouse on its own!

Marfy 1210 is the first Marfy pattern I’ve ever sewn, and if you’re not familiar with them, Marfy patterns come with no instructions, no technical drawing, no layout diagrams, nothing. You don’t even get any other sizes – just the one you’ve ordered, in pre-cut tissue, just like vintage patterns.

So the above is all I had to go on, plus a few cryptic phrases rubber stamped onto the tissue itself (if you thought “Burda-isms” were bad, hoo boy, you should see Marfy!). Still, I knew I was up for a challenge, and to be honest, the construction wasn’t any more different than dealing with KnipMode or Patrones when I can’t understand the instructions.

There are a lot of things I like about this blouse, but there are also a fair amount of things I’d change if I made it again.