So I’ve already shown you two versions of the Winter Base Layer top but both are really similar, both in colourblocking and for using the exact same base fabric. But this design is so much more versatile than what you’ve seen so far, and I wanted my second version to be a little different! So I changed up the way I played with the colourblocking and used some different fabrics, and I love this version just as much as my merino one!
It’s a fresh new week and it’s now the turn to look at the other design featured on the cover of “Sew Your Own Activewear” – the Yoga Bottoms! When I was developing this design I really wanted an easy-to-sew pair of leggings with features specifically designed for yoga and other activities which need a wide range of movement.
I started as new office job back in May (I’m a product manager in the music/tech space when I’m not designing sewing patterns or writing books!) and since this company is significantly bigger than all the previous offices I’ve worked for in the past, I’ve spent the last few months getting excited about the prospect of the first big office Christmas party of my life. And of course, with that comes What To Wear.
Last weekend I was overcome by the desire to make something.
I didn’t want anything long or involved, so I grabbed some ice blue soft shell I’d bought from Plush Addict and thought I’d make myself a gilet to keep my body warm when I go on long runs and springtime cycle rides. But I’d only bought a half meter to test out the fabric since they don’t have samples and it cost like £3 for the half meter. When it arrived, it wasn’t quite what I was expecting (so I’m glad I didn’t buy the full yardage!) but the fabric itself was too nice not to use for something. It’s got a dense, tightly woven exterior with a very slight stretch and the inside is a soft microfleece. So it’s both water resistant and warm, and I thought it’d be great for wearing over a base layer for the upcoming transitional weather.
But I was impatient, and made lots of mistakes. I planned to use a block I’ve been working on (but cut a size larger to account for less stretch than I’d drafted for), but the fabric was so short it only came to an inch or two below the waist. “Fine”, I thought, “I’ll just have a cropped gilet or add a hem band or something!” and merrily cut away. It was only then I realised that I’d cut the Front on the fold, forgetting in my haste that I wanted to have a front zipper or snap placket and I’d now not given myself enough room.
So rather than cause further damage, I opted to step back, put it aside, and come back to it later when I was less of a liability.
I am so excited to finally be able to share with you a project that I’ve been building towards for several years – Fehr Trade Print Club is a semi-regular series of collaborations with illustrators, pairing exclusive artwork with activewear patterns in limited edition fabric kits!
We first started the concept of an illustrator/patternmaker collaboration a few years ago with Laurie King, offering designed prints through Spoonflower with differently designed “zones” on the fabric for the different pattern pieces. This was a great learning experience, but ultimately, we wanted a bit more control, even though this means more work and more financial risk on my part. So we’re starting small, and of course I had to ask Laurie back to be the first Print Club collaborator!
So what’s different this time around? Well, for starters, the designs are printed onto Funkifabric’s “Titan” technical spandex base. This stuff is super high quality – beefy, matte, completely opaque, and no white “show through” when stretched. I ran London marathon in this base fabric in 2015 and it’s freaking fantastic (also the colours haven’t faded a bit since then either).
Wow, you all really do love a sale! It’s great to see so many of you sharing our enthusiasm for the new Lightspeed Leggings pattern, too! I hope you’ve had enough time to compose yourself after meeting our first athlete model, Jason, as today we’re going to take a look at our second athlete model, James. Yes, my husband James! 😘
I’ve got a bunch of things happening all at once (on top of crazy good opportunities coming out of my ears that I can’t talk about yet!) that weren’t quite big enough for a full post on their own so I thought I’d round them all up into a fun bit of Friday inspiration for you all! I’ve also got, ohhh, four finished garments to properly photoshoot so hopefully next week you’ll get to see more of those, too.
This may be the strangest thing I’ve ever sewn but a colleague was in a hit & run which broke her wrist, requiring metal plates and several surgeries. She’s doing much better now but hates the depressing beige brace she has to wear, so I offered to sew her a fun cover for it.
Before you read any further, if you haven’t watched the latest Sewing Bee episode yet, I just want to inform you that there are screenshots from the challenges in this post, but I don’t reveal who won or who lost any of the challenges, so you’re safe to read on!
This week’s episode was all about activewear, and I’ve been SO excited ever since the theme was revealed in last week’s preview. I mean, how could I not be excited! The pattern challenge this week was to sew a men’s cycling top, and it was revealed that none of the contestants had much experience with sewing lycra, either!
“Perfect”, I thought, “what a great opportunity to show the 3 million viewers that sewing activewear can be really accessible, even on your first try!” But Patrick and Esme had other ideas, pretty much talking nonstop about how difficult and fraught with peril sewing activewear is. Umm, guys, it’s really not that hard! I’ve taught loads of people to sew their first leggings and they practically dance out of the room!
For all of you in the US and UK who enjoyed a lovely long weekend, I salute you! I made the decision to devote the bulk of my four days to upgrading/migrating this site over to a new backend, and it was exactly as painful as I was expecting (and it’s not done yet). I’ve been wanting to for quite a few months now, but I just kept putting it off for all sorts of tech headache reasons, and I was right to! It took no less than 3 server moves with my web host to find a server that could support both the old and new platforms simultaneously during the transition period, then a bunch of setting conflicts, frantic forum searching, and then finally data munging all 1,036 posts, over 10,000 images, and a ridiculous amount of tags over in a way that broke the least amount of stuff. Which meant that I didn’t get to the actual appearance of it until late on Sunday, and it still needs a few more days work before I can start the fun 403 redirect process, yay! So until then you’ll still see the old site, and I’m going to do my best to redirect all the RSS for those of you who subscribe in your favourite reader, too!
This meant that I was mostly behind the computer (or a barbecue!) this weekend without much happening in my sewing room. But I’d been awaiting the arrival of a re-up on bear fabric (which I honestly didn’t think would arrive in time, but it did!!), so I whipped up a pair of bear shorts for the Transylvanian Bear Race on Friday while a large ftp process occupied my computer. I used my Steeplechase Leggings pattern (Biker short length), using two different Spoonflower bear prints for the body and yoke. I’ll do a full post on these after the race, but here’s a sneak peek from my test run in them on Sunday (because Nothing New On Race Day, folks!)
Each year I like to take the first of January to look back on what I’ve sewn in the previous year. So while this post is a celebration of the new year, it also helps me to put into perspective the year that has just gone. Somehow I always think the year has been a bit low on finished makes until I put everything together for the year’s collage!
Click the image to see it better, or right-click here to see it in a new tab to get a better look!
Tip: If you’d like to skim back through the posts for the above projects, you can click Gallery in the top menu, which will only show you finished projects, without all the magazine reviews and in-progress reports getting in the way! (Though a few of the makes in the bottom row I haven’t blogged about yet!)
In terms of pattern companies used this year, I made:
By my count, I made: 21 tops, 19 trousers (including leggings & shorts), 2 jumpsuits,
2 dresses, 10 pieces of lingerie (bras, panties, slips, etc), 1 bikini, 2 jackets/coats/cardigans and zero skirts (!). I made presents for my mom, sister-in-law, niece, and nephew, and James also received four tops and a pair of lounging bottoms this year, the lucky guy!
