Blog

Inspiration

PB Jam Leggings – update out now!

Back in 2013, when I started FehrTrade Patterns, there were a lot of things I didn’t know! Seven years on, I’ve learned so much from my mistakes, experiences, and from the generosity of others. The PB Jam Leggings (along with the XYT Workout Top) were the first pattern we ever released, and they were in need of a bit of modernising to bring up to the standards of the rest of our patterns.

I’m proud to say that the updated version of the PB Jam Leggings is finally out now! The list of changes here is quite extensive but here goes…

Gallery

DIY Period Panties

I’ve been trying to reduce my single-use plastic consumption over the last year, buying in bulk and seeking out plastic-free options wherever possible (Lush is wonderful for this!), and generally trying to lessen my impact on the planet. But one area where I am just not ready to give up the convenience of single use plastics is my period products.

Gallery

A mesh black lingerie set

If it ain’t broke, don’t fix it! Yes, this is a very similar set to the dotty one I shared on Friday, but I liked that one so much I wanted more in my lingerie drawer.

Earlier, I’d made the plain View 1 of the Sophie Hines Axis Tank pattern but this time around I wanted to make View 2 which has the seamed sides and back. I’ve seen loads of great examples of this pattern using different fabrics and it was the real reason I bought it!

Gallery

A dotty lingerie set

I seem to go in waves with lingerie sewing – I won’t sew anything for months on end, and then BAM! the feeling takes me and I sew a bunch all at once. Well, the feeling has definitely taken hold!

I’ve actually been trialling a bunch of soft bra patterns on and off over lockdown (which I might delve into at some point) but I’ve finally found one that I really like – the Sophie Hines Axis Tank pattern. This is a cropped, racerback top for stretch fabrics in two neckline heights that ends a few inches below the underbust. It has no illusions about offering any support, but I wanted a lightweight lounge bra since I’m mostly sat around at home all day anyway and don’t really need support unless I’m exercising (at which point I wear a sports bra anyway)

Article, Inspiration

Tutorial: Add a full-length zip to your Surf to Summit Top

As promised, and after many requests, I’ve created a tutorial for changing the half zip in your Surf to Summit Top pattern to be a fully-opening zipper! This is a pretty straightforward change but I like to be very thorough in my explanations so don’t be scared by the amount of steps – half of them are me just adding clarification.

This tutorial not only works for the Ladies version of our Surf to Summit Top pattern, but also the men’s version, too! I did this same change for our athlete model, Jason, when he wore the Surf to Summit Top with our men’s Lightspeed Leggings pattern.

Gallery

A Tokyo-inspired cycling jersey

Annnnd rounding out the final garment in my Tokyo-inspired three piece cycling set, it’s the jersey! For this one I used our FehrTrade Surf to Summit Top, which has been one of our bestsellers since it came out at the end of 2014. It’s super versatile, and can be used as a winter running top, classic cycling jersey, or swimming rashguard and has a bunch of interchangeable options. But some people just aren’t happy with a zillion options (err, me!) and had to go and do more tweaks, too!

Gallery

A Tokyo-inspired sports bra

Earlier this week I talked you through the inspiration for my Tokyo-inspired three piece cycling set and today I wanted to talk a little more about the smallest garment in the set – the sports bra!

Like the rest of the set, for the bra I predominantly used the Tokyo-inspired print from Funkifabrics on the Life Recycled base fabric, and really only used the Discovery Fabrics’ Yoga Stretch in “Rust Berry” for the under-bust band. For the inner layers I used some beige power mesh from Sewing Chest.

Gallery

Tokyo-inspired cycling bib shorts

You heard all about my three-piece cycling set as a whole yesterday, but today I want to talk specifically about the bib shorts that I wore to ride up the virtual Mont Ventoux on Saturday.

For these I used our very own Rouleur Leggings pattern using the shorts option and the bib waist treatment (so essentially it’s View B). I wanted the Tokyo-inspired print from Funkifabrics (on their Life Recycled base fabric) to be the star of the shorts here so I used that for most of the pattern pieces, but I used the Discovery Fabrics’ Yoga Stretch in “Rust Berry” for the leg band and the bib for a nice bit of contrast.

Gallery

A Tokyo-inspired three-piece cycling set

Strap in, because this is going to be one EPIC ride! No, seriously – not just what I did on the bike, but also in the sewing of this set, which will be spread over the course of five posts, because, well, I’ve got a lot to say and a lot of details to share and I want to give this all the space it deserves to breathe and inspire.

This all started life back in February, when Funkifabrics got in touch to see if I’d be interested in sewing something up from one of their fabric designs in their Japan collection with the intention of tying in with the Tokyo Olympics. Did I!? It’s no secret that I love Funkifabrics, and I selected this Tokyo-inspired nightlife print which I chose to have printed on their Life Recycled base fabric (because I’m trying to buy sustainable or recycled fabrics as much as I can!). I didn’t really have a project in mind when it arrived, but a lockdown took hold, the Olympics got postponed, and I started to have to do all my exercise at home on our new treadmill and turbo-trainer, so I found myself creating my own events.

Gallery

More upholstery – sewing wheelhouse sofa cushions

Since lockdown began in March, James has been using the wheelhouse of our boat as his office, but we’ve also spent a few nights up there Zooming with friends or watching films for something different. But the cushion on the built-in sofa up there was just a thin foam pad that we’d cover in a single bed sheet and then pile pillows behind for some back support, and it wasn’t really that comfortable for long periods of time.

So James took matters into his own hands and ordered some custom foam cushions for the bottom and back support from Foam Factory (who we’d heartily recommend and will definitely use again, btw). And I found myself saying the words “I guess I’ll sew up some covers for them then…” even though I hate sewing upholstery and home dec! Turns out I hate spending exorbitant amounts for someone else to do it even more!!